Concrete pouring rules

1154
Photo by Pixabay.com

Concrete hardens after setting and lasts for a month. After 30 days of concrete levelling, solution finally hardens and is able to withstand various loads. The need for such a long period is due to the use of a thick layer for pouring foundations. The subsequent layer of concrete is poured in the curing process only on the third day, until this time it is impossible to touch the poured concrete. Since it is able to crack. Read more information at Mud Dog Jacking to be able to know all the details of this process and, if necessary, ask for help of these specialists.

Cracks on the surface are not always visible, but they exist, which means that they can show themselves at the end of the construction of buildings and structures. Thus, the laying of the working mixture in two layers should occur no longer than 8 hours in the cold season, no more than four hours in the autumn and spring, and no more than three hours in the hot season. Laying of subsequent layers should be carried out on a flat, cleaned surface and a dried surface.

To build a solid foundation, it is important to adhere to the recommendations and avoid the following mistakes:

  • Some builders do not consider it necessary to think over the pouring plan and start the workflow right away. The prepared work plan will save valuable time and eliminate downtime, which means that it will be possible to finish concreting on time.
  • Another mistake is the uneven packing of the working mixture over the entire area of ​​the site.
  • Using the “cold seam” method, builders do not clean the previously poured surface. You can remove the cement film with a hammer or chemical composition.
  • Using hot seam concreting method, the flooded surface is not covered with roofing material or a film.
  • In winter, the concrete surface is not cleaned of ice or snow.